ROAD SAW: is a self-propelled, walk-behind machine weighing approximately 500kg. It is used on flat, even surfaces such as roads, factory floors, driveways and patios, where access is not a problem. Road saws cut to a depth of 450mm. (Diesel, Petrol & LPG)

HANDSAW: A hand-held saw used to cut floors, walls, pipes, etc. It has a maximum cut-depth of 150mm. (Electric, Hydraulic & Petrol)

CORE DRILL: Leaves a cylindrical hole in the surface drilled. The core is removed leaving a perfectly round hole with no jagged edges. Various diameters with largest being 750mm in stock. Holes can be drilled horizontally, vertically or diagonally, and also from below. (Electric & Hydraulic)

RING SAW: Has the same application as the Hand Saw but able to cut to a depth of 260mm.

WALL SAW (Track mounted Saw): Wall sawing uses a saw that runs along a mounted track. It is used for cutting walls, floors, stairs, bridges, when other saws are cumbersome or when deeper cutting is required. Cuts to a depth of 730mm. (Electric & Hydraulic)

WATER & SLURRY CARTS: Also available. For use when water is unavailable on site and for the safe removal and disposal of slurry.

DIAMOND CHAIN SAWS: No overcuts

We have various hydraulic and electric machines to service your needs. They are used in various applications and in areas of poor ventilation. These will be explained if you require these any time.